DISH Network 1000.2 DISH PRO PLUS INTEGRATED LNBF
CHEAP,Discount,Buy,Sale,Bestsellers,Good,For,REVIEW, DISH Network 1000.2 DISH PRO PLUS INTEGRATED LNBFDish Network145511,Wholesale,Promotions,Shopping,Shipping,DISH Network 1000.2 DISH PRO PLUS INTEGRATED LNBFDish Network145511,BestSelling,Off,Savings,Gifts,Cool,Hot,Top,Sellers,Overview,Specifications,Feature,on sale,DISH Network 1000.2 DISH PRO PLUS INTEGRATED LNBFDish Network145511 DISH Network 1000.2 DISH PRO PLUS INTEGRATED LNBFDish Network145511
DISH Network 1000.2 DISH PRO PLUS INTEGRATED LNBF Overview
Three receiver output ports support a combination of DISH Pro Plus, DISH Pro, and Legacy receivers, including up to three DISH Pro Plus (dual-tuner) receivers when used with DISH Pro Plus Separators.While Legacy receivers are supported without a DISH Pro Adapter, at least one DISH Pro or DISH Pro Plus receiver must be connected and powered at all times to power the LNBF.LNB IN port supports adding a fourth orbital location. The LNB IN port is operational only when receiver output ports are connected directly to satellite receivers. It is disabled when the receiver output ports are connected to a switch.The default output of the receiver ports is 119° on PORT 1, 110° on PORT 2 and 129° on PORT 3. Note that the output ports do not follow the feed horns, but rather allow for PORT 1 to be used for peaking on 119°, similar to other LNBFs.On the Installation Summary screens, the DPP 1000.2 LNBF may display as "DPP Twin" or "DPP Triple" prior to the receiver's software download. After downloading software, it will display as "1K.2" and "DPP 1K.2". Legacy receivers will display the LNBF as "SW64" when the LNB IN port is unused or "SW21-4Sat" when a fourth orbital location is connected (if supported by that receiver)
DISH Network 1000.2 DISH PRO PLUS INTEGRATED LNBF Feature
- LNB IN port supports adding a fourth orbital location
- Receivers need to download the latest software to view 129°W
